
- Manual
- 2 components
- PU, epoxy, MS-polymer, wood adhesives
- Small, medium & large panels
Basic info
M210 is a manual machine system for pumping, mixing and spreading of two component adhesives customized for production and manufacturing of sandwich panels. The system serves to provide efficiency in a low quantity production of sandwich panels and can handle panels of any size.
Description
The adhesive components are pumped directly out of the 200 litre drums to the metering unit which sets the mixing ratio. The adhesive is mixed in a static mixer mounded on the outlet of the adhesive valve. The adhesive is then applied through the spreader. An extension tube between mixer and spreader allows for the operator to reach across wider panels. The metering unit together with the two adhesive drums and pumps are placed on a trolley to easily move the system around at the production site.
As a standard feature the base component is stirred through a pneumatic driven agitator to prevent sedimentation in the drum.
When the work is finished and before the adhesive is cured, the spreader, mixer and extension tube are cleaned with solvent in a flush unit to prepare them for reuse.
Illustrations
System principal layout

Specifications
Mixing ratio – 100:10 – 100:100 (fixed)
Metering technique – Volumetric cylinders, mechanically linked
Mixing technique – Static mixer
Capacity – Up to 6kg/min
Viscosity – Up to 100,000 mPas
System pressure maximum – 250 bar
Hose length – Up to 10m
Spreader width – Up to 600mm, cc 5 or 10mm
Nozzle outlet diameter – 1.5, 2.0, 2.5 or 3.0 mm
Dimensions LxWxH – 1.9 x 1.2 x 1.0
Net weight – 450kg
Power – 6 bar @ 1000l/min